Roseville, Mn 55113
(651) 247-7604
Support@AllServiceRescue.com

    Using a high-powered negative air machine in association with the viper whip air wash system; each vent, return, and main is addressed. All supply vents in the home are removed and cleaned by the forward whip system forcing all dust and debris to main trunk lines or high power vacuum negative air machine. All return vents are then cleaned with a high-pressured air wash system that pushes 200 psi into every opening of the return system. It forces all dust and debris to the return main line or the high powered negative air machine. Finally the supply and return mains are cleaned using the reverse viper whip system and high-powered negative air machine. All lines both vertical and horizontal are reverse snaked through a one-inch access hole into our 8-inch vacuum line.

Procedure is performed using the following steps:

1. Technician arrives and explains the procedure and size/layout of the duct system.
2. The negative air machine and air wash system is set up throughout the entire home.
3. Vacuum system is attached to the return line of the system and the return vents are blown down with 200 pounds of pressure through air wash system
4. Following the completion of all return vent cleanings, the vacuum is attached to the supply line of the unit and all vent covers are removed.
5. All supply lines in the home are cleaned with forward viper whip system pushing all debris to the main trunk line and the high-powered vacuum system.
6. Finally, all main lines are reverse viper whipped to the high-powered negative air machine. (This includes all horizontal and vertical lines)
7. When cleaning process is completed, all holes are completely sealed with 28 gage galvanized sheet metal, screws, and heat metal tape. The smaller holes are sealed with a 1-inch size cap plug.
8. The technician then will insure his work area is neat and clean, putting all accessories back to there original place as well as addressing any further questions the customer may have

PDF Printout

Support@AllServiceRescue.com